سڀ درجا بندي

گھمڻ واريون داخلون

توهان هتي آهيو:گھر> پراڊڪٽ > گھمڻ واريون داخلون

CCMT09T308-HM
CCMT09T308-HM
CCMT09T308-HM
CVD Double Coated CCMT09T308-HM ڪاربائيڊ ٽرننگ انسرٽس لاءِ مائلڊ اسٽيل
CVD Double Coated CCMT09T308-HM ڪاربائيڊ ٽرننگ انسرٽس لاءِ مائلڊ اسٽيل
CVD Double Coated CCMT09T308-HM ڪاربائيڊ ٽرننگ انسرٽس لاءِ مائلڊ اسٽيل

CVD Double Coated CCMT09T308-HM ڪاربائيڊ ٽرننگ انسرٽس لاءِ مائلڊ اسٽيل


جي غيرموجودگي سبب:

CCMT09T308-HM

رنگ:

گولڊ / ڊبل رنگ

له:

ٽنگسٽن ڪاربائيڊ

ڪمپيشي

P/K/M

گريڊ:

XH7228/XH7229/

XH7230

ڪوٽنگ:

سي وي ڊي

MOQ:

20Pcs

قيمت:

ڳالهين

برانڊ جو نالو:

ليفا

ڏکيائي

HRA91-93

سرٽيفڪيٽ:

ISO9001: 2008

درخواست:

رخ

اصل جڳھ:

زوزو، چين

سنڀاليندڙ:

ٽرننگ هولڊر / ليٿ هولڊر

پهچائڻ جي تاريخ:

اسٽاڪ موجود

انڪوائري
وضاحت
11


وڏي عمر:

due to use of high quality raw material and advanced technology in




اعلي پيداوار:

due to its high hardness, the insert has good cutting performance, can work at higher speeds with less power consumption;


22


33


اعلي درستگي:

the insert has a small clearance between the cutting edge and bore hole, so it can increase the accuracy of machining process;Low vibration and noise during operation.

Specifications

اسپين

قسم

طول

Cermet   Grade
او
L
اي سي
S
D
R
XH7228XH7230
CCMT
060204-ايڇ ايم6.4
6.351
2.38
2.8
0.4

060208-ايڇ ايم6.4
6.3512.382.8
0.4

09T304-HM9.7
9.525
3.97
4.4
0.4

09T308-HM9.7
9.5253.97
4.4
0.4

120404-ايڇ ايم12.9
12.7
4.76
5.56
0.4

120408-ايڇ ايم12.9
12.74.76
5.56
0.8

اپليڪشن

To prevent insert waste and easily detect wear, the gold-colored TiN outer layer of the Dragonskin multilayer CVD Ti(C,N)/Al2O3/TiN coating from cutting tool. It not only enables users to clearly identify insert wear and index before a breakage, but also prevents sharp cutting edges from going unused and the insert being inadvertently discarded.

ISO-P اسٽيل پري تائين سڀ کان وڏو مادي گروپ آهن حصو مشين ۾، ۽ مواد شامل آهن ڊڪٽائل، گهٽ ڪاربن اسٽيل کان اعلي مصري اسٽيل گريڊ تائين. ھن ۾ شامل ڪيا ويا آھن سختي ۾ تبديليون، ايپليڪيشن جي قسمن ۽ مشين جي حالتن ۾ ٽرننگ آپريشن دوران. ھڪڙي مناسب انڊيڪسبل داخل ڪرڻ واري گريڊ کي آسان ڪرڻ لاء.

The cutting characteristics of most turning applications are similar. For a given surface only one cutting tool is used. This tool must overhang its holder to some extent to enable the holder to clear the rotating workpiece. Once the cut starts, the tool and the workpiece are usually in contact until the surface is completely generated. During this time the cutting speed and cut dimensions will be constant when a cylindrical surface is being turned. In the case of facing operations the cutting speed is proportional to the work diameter, the speed decreasing as the center of the piece is approached. Sometimes a spindle speed changing mechanism is provided to increase the rotating speed of the workpiece as the tool moves to the center of the part.

ڊرائنگ
3
5
11
انڪوائري

گرم درجه بندي